Aluminum stretcher tubes are lightweight and rustproof. Crain aluminum tubes feature a score line on the inner tube and the outer tube for aligning the buttons with the holes during length adjustment. These tubes work with other standard size diameter tubes. Range of useful length adjustment: 3 feet to 4 foot 8 inches. Closed length: 5 feet.
Range of useful length adjustment: 5 feet to 8 foot 8 inches. This multi-function three-position tail block has a 20 inch flat position for stretching off straight walls. This also locks the pivot so you can stretch all the way around a post as can be helpful in basements. This tail block also has wheels to help move it down the wall fast, and solid rubber pads that help it stay put under load. Works with all Crain stretchers, as well as other stretchers with standard poles.
Net weight: 4. The notched carpet spreader is made from flexible steel. It can be used to press and hold the carpet in the gully at the tack strip while the stretch is released. This causes the carpet's backing to set better on the pins of the tack strip.
The blade of this spreader is flexible enough that it can also be used in tight spaces as a glue spreading trowel. The blue plastic handle is ergonomically contoured. Blade width: 12 inches. Net weight: 8 oz. The plain carpet spreader is made with thicker 16 gauge plated steel without notches. It holds the carpet on the tack strip as the stretch is released for better setting of the pins into the carpet's backing. With no notches, the tool makes a better tucking tool.
Push it down the wall with pressure on the handle, and it tucks the carpet without catching yarns. The thicker blade does not bend under load. The black plastic handle is ergonomically contoured. Blade width: 10 inches. The cotton grip head for our No. The wire nap grips of this head are less likely to pull or snag loops or yarns that are easily damaged by the standard stretcher pin plate.
Nap grips are replaceable. The head case will additionally hold an Auto-Lok tube and three extension tubes not included with the No. The head case has wheels for easy transport. The head case is made from tough yet lightweight blow- molded plastic with recessed latches and handles.
Net weight: 32 lbs. Our tube case has recesses that can be hooked onto our stretcher head cases that have corresponding hooks and wheels for easy transport. The tube case is made from high- density blow-molded plastic with recessed latches and handles for durability. Net weight: 27 lbs. The tube case holds an Auto-Lok tube and up to three additional extension tubes.
The tube case has recesses that can be hooked onto our stretcher head cases that have corresponding hooks and wheels for easy transport. The tube case is made from high-density blow-molded plastic with recessed latches and handles for durability.
The head case includes wheels, and the tube case hooks on the head case for easy transport of both cases. The cases split to distribute the weight when carrying is necessary, or for loading into the van.
These cases hold the driving head, tail block, transfer tube, Auto-Lok tube, and up to 7 additional extension tubes. Also holds Roberts Made from tough, double-wall, high-density blow-molded plastic. Recessed latches and handles improve durability. Net weight: 18 lbs. The space-saving design holds the driving head, transfer tube, tail block, Auto-Lok tube, and up to 3 additional extension tubes.
The case has wheels for easy transport. The head case is made from tough yet lightweight blow-molded plastic, Latches and handles are recessed for added durability. Net weight: 11 lbs. Convenient features include a push-button stretch lock located on the handle for partial stretches, and a visual pin depth adjustment knob located on top of the head.
No screws or screwdrivers are required to adjust pin depth. Round tube construction provides smooth stretching motion. Net weight: 12 lbs. Depress the built-in lock pin, and you can lock the swivel in 5 positions. The push-button stretch lock is conveniently located on the handle for partial stretches. Pin depth is adjusted with two screws in the depth bar of the pin plate.
Our deluxe knee kicker has a high profile body that more easily spans over stretcher tubes, and a thicker natural rubber bumper for comfort and durability. The visual pin depth dial provides nine different depth settings for various carpets.
Power rods extending through the pin plate provide support and improved force transfer to the carpet. The gripping head includes three nap grips and a pin plate with 16 hardened steel pins. Comes with gripper cap. Bumper, nap grips, and pin plate are replaceable. Replacement bumper: Part No. Replacement gripper inserts: Part No.
Replacement pin plate: Part No. The standard thickness bumper is made from rubber for durability and provides a firm feel and impact that is preferred by many installers. Net weight: 3 lbs. The telescoping steel tube construction of the No. The double buttons provide four length adjustments from 21" to 25". Net weight: 5. It moves a wider section of carpet with every kick. It also has our extra-thick bumper to absorb more impact. The telescoping steel tube construction is highly durable.
These Comfort Knees pads have an extra thick polyurethane skin coating on the kneeling surfaces for increased durability. The polyurethane skin also helps to prevent build-up of sharp items such as splinters that can scratch floors. Comfort Knees are designed for floor installation. They provide protection for both kneeling or knee kicking, and can stay on at all times. The extra wide straps won't pinch your legs. The contour conforms to the motion of your knee. Made from flexible yet durable neoprene material, these pads are machine-washable.
Inner knee pad is replaceable. Net weight: 1 lb. Made especially for carpet installation, these pads provide protection for both kneeling and knee kicking, so they stay on at all times. The extra wide straps won't pinch your legs, even when wearing shorts.
The contour conforms to the motion of your knee whether walking, kneeling, or kicking. This cutter trims seam edges for better seams. The precision blade pockets on both left and right sides hold the slotted razor blades without screws. The front guide is beveled to follow the carpet's rows. The soft grip handle provides comfort and control. For best results, trim WITH in the direction of the nap sweep of the carpet.
Beginning at a starting point on the left side of the seam, trim with the left blade down in the direction of the nap sweep. Return to this same starting point on the right side of the carpet and trim with the left blade down in the same direction. This procedure simulates the factory spacing of the carpet's rows on most carpets. When necessary, to trim both edges as close as possible to the tufts, trim the right side of the seam with the right blade down, then on the left side retract the right blade and trim with the left blade down.
Blades: slotted razor Crain No. The rounded notches on the front guide help this cutter find rows in difficult carpets including Berbers, hydrashift, and commercial level loop. Takes standard slotted razor blades. The offset blade clamp allows fast blade depth adjustment and blade changes. For best results, trim WITH in the direction of the nap sweep.
Beginning at a starting point on the left side of the seam, trim with a blade down on the left side of the cutter. Return to this same starting point on the right side of the carpet and trim with the blade down on the same left side of the cutter, moving down the seam in the same direction. When necessary, to trim both edges as close as possible to the tufts, trim the right side of the seam with a blade down on the right side, then for the left side retract the right blade and trim with the left blade down.
This cutter has a base for cutting over pad or other carpet that protects the material underneath. The blade carrier is adjustable in height so you can lock the beveled guide at just the right position to follow in the rows. The cutter has dual blade pockets on left and right sides, and a large thumb knob that tightens to lock in the blades. This cutter excels on zigzag "hydra-shift" carpets including commercial loop pile and Berbers! The blade runs directly behind the center row guide.
This keeps the blade away from the offset yarns, preventing yarns from being sheared, which causes unsightly seams. The wide base keeps the blade perpendicular to the yarns, further reducing nap shear.
The row guide can be retracted fully into the base for top cutting. The tool can also be used as a trimmer to precisely trim carpet up to Z-bar or vinyl molding. Net weight: 1. Blades: Slotted razor Crain No. This ultra-straight spring steel row finder has smooth, rounded notches that opens rows of difficult carpets. The rounded ends can easily enter the rows of Berber and loop pile commercial carpets without catching loops.
Once this tool finds a row, it can be moved back and forth in a sawing action to open the row. After use, a seam cutter is able to follow the row with reduced shearing of yarns.
The textured plastic handle provides good grip. The pointed ends can easily enter the rows of dense cut pile or plush carpets. The taller, thicker profile clears thick cut pile tufting and increases separation. This double-ended tool has a pointed end for cut pile with a wider conical surface behind the point.
On tall cut pile, the narrow point penetrates deep within the row, while the wider conical surface spreads the tufts. The opposite end is beveled and rounded for spreading loops on loop pile and Berber carpets without snagging. This tool will effectively open and spread rows for reduced shearing of carpet nap by the seam cutter. Machined from solid steel, and nickel plated. This inexpensive yet versatile cutter is great for rough cutting of carpet off the roll. It takes slotted razor blades, utility blades, or Crain No.
When used with utility or Crain No. Steel springs on both sides of the cutter hold the carpet down as it is being cut. Large thumb knob allows simple, fast blade changes. The Versa-Cutter is our most versatile and durable carpet cutter. Springs on either side of the cutter hold the carpet down as it is being cut. The thin steel row guide follows in the rows of carpet. The steel foot plate fastened on the base reduces wear and extends the life of the cutter.
Two large thumb knobs allow simple, fast blade changes. Built-in wheels allow it to be moved easily from a kneeling position. The movable fence and tile guide can be set for repetitive straight or diagonal cuts. Replacement blade: No. Wood cutting blade available: No. Net weight: 38 lbs. The ultra-low profile and narrow handle of this iron make it easier to bring the seam together near the back of the iron.
Dual indicator lights show both power-on and heating status. Cord life is improved with the rotating cord assembly with flexible strain relief which extends the cord out of the seam area. The heavy-duty handle and riveted tray are highly durable. The back tip of the base is grooved to comb adhesive to the wall as the iron is angled out. This prevents "dragging-off" of adhesive which can cause failure. Non-stick coated base and 12' long HSJO cord are standard.
Runs at watts. The case is made with durable, smooth-acting piano-type hinge, a plated steel handle and lockable hasp for security. Problems with initial overshoot and large temperature swings during operation are reduced. Large, easy to read dial knob displays temperature settings in Fahrenheit. Dual indicator lights show power-on and heating status. Ultra-low profile base makes it easier to get the seam together.
The back of the base is grooved to comb adhesive to the wall as the iron is removed by angling it out. The durable, rotating HSJO cord with flexible strain relief extending it out of the seam area. This roller has a solid axle with ten steel star rollers. The star wheels press the carpet's backing into the hot melt adhesive.
The steel bracket is welded onto the handle stem and plated. Rounded handle fits well in the palm of the hand, and is made of impact-resistant plastic for durability. Roller width: 4". Net weight: 14 oz. The solid axle of the Pro Roller spans six inches wide and has 18 steel star wheel rollers.
It ensures adequate pressure across the seam area even when used on wide 6" tape. The steel axle and handle stem are welded and plated for durability. The hard plastic handle is rounded to fit well in the palm of the hand. Roller width: 6". The flex axle roller is made with two pivoting axles. Mounted on each axle are seven steel star rollers 14 total. As the roller is moved forward and backward, the axles pivot outwardly then inwardly. This action mixes the carpet fibers and pulls the seam edges closer together for less visible seams.
Roller area width is 4" total. Net weight: 10 oz. The bigfoot roller is made with three wide ribbed roller sections. The wide surface area on the ribbed surfaces prevents yarns from being snagged, protecting the yarns of delicate carpet fibers better than star wheels.
The ribs also provide concentrated pressure to force the carpet's backing into the hot melt adhesive. This is the best seam roller for fine denier saxony, plush, and velvet carpets. Net weight: 15 oz. These seam squeezers are made with a powerful torsion spring and two grippers that are oriented inwardly to pull seams together. Sold in a set of two. They are helpful on glue-down carpet installations to pull and hold seams together.
Pulling force can be controlled with the amount of hand pressure. The spring arms are vinyl-coated for comfort. Nap grips are replaceable: Part No. Net weight: 3 lb. The tool produces pressure on the seam to press the carpet's backing into the adhesive. The three rows of star wheels mix the yarns of the carpet near the seam to reduce visibility.
The body shape is optimal for applying hand pressure, and is finished with durable hammertone paint for good grip. Net weight: 2 lbs. Our big loop nap shears have offset handles with oversize loops for users with large fingers. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. The right side loop accommodates two fingers for ease of activation of the top blade.
Handles are vinyl-coated for ease of grip. Net weight: 6 oz. Our duckbill nap shears have offset handles with smaller one inch loops for precision control. Net weight: 5 oz. Our 8" napping shears provide ultra-large loops and longer 3 inch blades. The angled handles easily position the blades for trimming off the tops of carpet tufts. Oversized loops accommodate large fingers. The larger right side loop accommodates multiple fingers for ease of activation of the top blade.
This all-steel case is designed especially for carrying carpet seaming irons. Inside there's a movable platform inside that adapts to hold 3" or 6" irons, a partition for holding a roll of tape, and a separate space to loosely lay the iron's cord and an extension cord.
The case top is connected by a durable piano-style hinge for smooth opening and closing, and includes plated steel folding handle. Heavy-duty latch has lockable hasp. Take care of your iron with a Crain combo case. Net weight: 8 lbs. This replacement iron tray holds Crain 3 inch irons and other popular 3 inch seaming irons.
The spring clips are riveted to the tray for durability. Angled clip design facilitates "hands-free" re-insertion of the iron into the tray. Long-lasting all-steel construction. The Opto Power Tacker has a ruggedized electronic control board including an optical sensor that fires in response to the motion of a tough sliding trigger. The delicate mechanical microswitch of previous tackers, which frequently required repair, has been eliminated.
This tacker also has a long, slender nose that more easily parts yarns to penetrate down to the carpet's backing. The short overall height, narrow profile, and rounded cap allow it to get into tight areas. Powerful 11 AMP solenoid drives staples even into hardwoods. Precision jam-resistant magazine is rigidly mounted on a boxed frame and opens with a simple release button.
Once open, the staple channel is easily accessible for removal of broken staples. The No. The case is made with durable, smooth-acting piano-type hinge, a plated steel handle and lockable hasp for security. Problems with initial overshoot and large temperature swings during operation are reduced. Large, easy to read dial knob displays temperature settings in Fahrenheit.
Dual indicator lights show power-on and heating status. Ultra-low profile base makes it easier to get the seam together.
The back of the base is grooved to comb adhesive to the wall as the iron is removed by angling it out. The durable, rotating HSJO cord with flexible strain relief extending it out of the seam area.
This roller has a solid axle with ten steel star rollers. The star wheels press the carpet's backing into the hot melt adhesive. The steel bracket is welded onto the handle stem and plated.
Rounded handle fits well in the palm of the hand, and is made of impact-resistant plastic for durability. Roller width: 4". Net weight: 14 oz. The solid axle of the Pro Roller spans six inches wide and has 18 steel star wheel rollers. It ensures adequate pressure across the seam area even when used on wide 6" tape. The steel axle and handle stem are welded and plated for durability.
The hard plastic handle is rounded to fit well in the palm of the hand. Roller width: 6". The flex axle roller is made with two pivoting axles. Mounted on each axle are seven steel star rollers 14 total. As the roller is moved forward and backward, the axles pivot outwardly then inwardly. This action mixes the carpet fibers and pulls the seam edges closer together for less visible seams.
Roller area width is 4" total. Net weight: 10 oz. The bigfoot roller is made with three wide ribbed roller sections.
The wide surface area on the ribbed surfaces prevents yarns from being snagged, protecting the yarns of delicate carpet fibers better than star wheels. The ribs also provide concentrated pressure to force the carpet's backing into the hot melt adhesive. This is the best seam roller for fine denier saxony, plush, and velvet carpets. Net weight: 15 oz. These seam squeezers are made with a powerful torsion spring and two grippers that are oriented inwardly to pull seams together.
Sold in a set of two. They are helpful on glue-down carpet installations to pull and hold seams together. Pulling force can be controlled with the amount of hand pressure.
The spring arms are vinyl-coated for comfort. Nap grips are replaceable: Part No.
0コメント