Length Width Height 8. Weight Age Recommendation: Not for children under 14 years. This is not a toy. Please visit www. Always let the electronic components cool to. During extreme conditions, throttle management is necessary when running near maximum levels of.
For example, if the batter y measures A void using partially charged batteries, as the. Other charges, including but not limited to shipping and handling, taxes, ineligible items, will be billed on your first payment.
Payments for Easy Pay ineligible items will be due at time of order. Easy Pay is only available by using a valid Credit Card. Paypal cannot be used with Easy Pay. The first payment is charged to your credit card when your order is invoiced.
Additional payments are then billed to the credit card every 30 days after the first payment, until all payments have been made. Next Shipment February Find it Locally. When operating with the BEC disabled, E-flite recommends the use of a separate, high-power, external BEC like the Ultimate BEC , or receiver pack and switch using the following items to ensure trouble-free operation:. JR mAh 4. Before you connect your ESC and begin flying, take a moment to look it over.
The motor side has three gauge wires blue, red, and black with 3. The red wire connects to the red wire on your battery pack, the black wire connects to the black wire on your battery pack. If the wires are reversed, the ESC may be damaged. Reversing polarity will void your warranty, so always double-check this connection. The throttle lead connects to the throttle channel on your radio receiver. You should always treat the motor and propeller as live and dangerous, remembering it could start at any time, and keep any body parts, clothing and tools clear of the propeller arc.
When flying in hot weather, we recommend checking on the condition of the ESC, battery, and motor after each flight. You may want to consider letting the electronic components cool to near ambient temperature between flights. We also recommend throttle management when running near maximum levels of current draw during extreme conditions.
It is not recommended you fly an entire flight at full throttle. If this is done, it is possible to cause permanent damage to your motor, battery, and ESC.
The controller will indicate the soft cutoff voltage setting every time you plug the battery in by first emitting a low, long tone, to indicate startup. Proper air cooling is required during flights so the ESC should be placed in an area where air flows over the controller. Connecting the ESC to the Motor. The three wires from the motor connect to the three female gold bullet connectors on the ESC. The order of connection to the motor is not important; any motor wire can be plugged into any connector.
0コメント